TP9SF Elite Threaded Barrel

Focused Discussions for all Canik Firearms. (TP Series, P Series, Shark, Stingray & MKEK)
Post Reply
jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

TP9SF Elite Threaded Barrel

Post by jnichols2 » Sat Nov 09, 2019 7:53 pm

I actually have a TP9 Elite Combat. It has a metric threaded barrel (13,5mm X 1mm LH).
I would like to use it on my 1/2" x 28 suppressor, without an adaptor if possible.

Prepper Gun Shop has a 1/2" x 28 barrel for the TP9SF Elite.
It says NOT THE TP9SF, TP9V2 OR THE TP9SA, but doesn't mention the TP9 Elite Combat.
Will the above barrel fit my TP9 Elite Combat? Or am I stuck using an adaptor or switching pistons?
0 x

User avatar
Janik
Staff Member
Posts: 2742
Joined: Mon Apr 23, 2018 4:59 pm
Founding Member #: 001
Location: Iowa
Contact:

Re: TP9SF Elite Threaded Barrel

Post by Janik » Sat Nov 09, 2019 8:02 pm

I don't see why not. The slides appear identical to me. Except the obvious red dot option on the EC of course.
0 x

User avatar
Janik
Staff Member
Posts: 2742
Joined: Mon Apr 23, 2018 4:59 pm
Founding Member #: 001
Location: Iowa
Contact:

Re: TP9SF Elite Threaded Barrel

Post by Janik » Sat Nov 09, 2019 8:12 pm

Just put my Elite barrel in my Elite Combat, cycled snap caps no problem. Also, the lug profiles look identical. Though I didn't take any precise measurements.
0 x

User avatar
TL1000RSquid
Global Moderator
Posts: 1628
Joined: Wed Apr 25, 2018 2:24 pm
Founding Member #: 007
Location: Texas

Re: TP9SF Elite Threaded Barrel

Post by TL1000RSquid » Sat Nov 09, 2019 11:37 pm

As said should fit they're the same gun the EC just has some aftermarket parts out of the box.
0 x

abody711
Member
Posts: 31
Joined: Wed Oct 30, 2019 2:10 pm

Re: TP9SF Elite Threaded Barrel

Post by abody711 » Sun Nov 10, 2019 10:29 am

I bought a RCM barrel for TP9SFT for the same reason. I seem to remember they had a different barrel for the Elite. I would contact RCM and ask.
0 x

jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

Re: TP9SF Elite Threaded Barrel

Post by jnichols2 » Sun Nov 10, 2019 12:51 pm

It's the Elite barrel I'm thinking of getting. My gun is an Elite Combat. It seems to be the same as Elite, just some upgrades.

Thanks to all who helped. Darn! It's on backorder now.
Oh well, It will be another month before I get the suppressor out of jail anyway. :)
0 x

User avatar
Janik
Staff Member
Posts: 2742
Joined: Mon Apr 23, 2018 4:59 pm
Founding Member #: 001
Location: Iowa
Contact:

Re: TP9SF Elite Threaded Barrel

Post by Janik » Sun Nov 10, 2019 1:07 pm

jnichols2 wrote:
Sun Nov 10, 2019 12:51 pm
Darn! It's on backorder now.
Might want to look on Gunbroker for one then. Who knows if they will actually restock them. Not sure they are real hot sellers. I've seen their SFx and V2 threaded barrel options on Gunbroker from time to time. It would be worth a search.
0 x

jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

Re: TP9SF Elite Threaded Barrel

Post by jnichols2 » Wed Feb 26, 2020 9:56 pm

They sent me an email saying it's back in stock, and on sale for $139,99, I ordered it.
0 x

Coachdodd
Supporting Member
Supporting Member
Posts: 36
Joined: Thu Jan 09, 2020 8:38 pm

Re: TP9SF Elite Threaded Barrel

Post by Coachdodd » Thu Feb 27, 2020 9:55 am

Should be back in stock now and, as others have said, they are "essentially" the same firearm just more/different furniture on the Combat
0 x

jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

Re: TP9SF Elite Threaded Barrel

Post by jnichols2 » Thu Feb 27, 2020 2:41 pm

I was notified it shipped a few minutes ago.
No hurry, my suppressor paperwork was among a very large batch that got hung up over e-signature.
The process seems to be moving now, but it will still be several months.

When I get the Canik barrel, I can check it out during a "Jail Visit".
Besides, I'm healing from having my upper teeth pulled and implants installed. :) :)
0 x

jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

Re: TP9SF Elite Threaded Barrel

Post by jnichols2 » Wed Mar 04, 2020 9:23 pm

Well, my TP9SF Elite barrel with 1/2" x 28 threads arrived yesterday.
I checked it out this morning. It seems to be the same as my Elite Combat, except it doesn't have flat sides.

I cleaned, lubed, and installed it.
It function checks OK, and cycles snap caps. It should work fine for my supressor.
It's not a Match Grade barrel like the original, but I won't have to be swapping supressor pistons.
I'll still have the Match Grade barrel for any time I need/want to use it.

My mouth is feeling some better after having the upper teeth pulled, and four implants installed.
I'm hoping to get to the range to try it out next week.
0 x

CanikFanatik001
Member
Posts: 13
Joined: Tue Mar 10, 2020 2:07 pm
Location: Birmingham

Re: TP9SF Elite Threaded Barrel

Post by CanikFanatik001 » Tue Mar 10, 2020 10:06 pm

Where can I get a threaded barrel for my sf elite? I am having trouble locating one. Preferably match grade but I’ll take what I can get.
0 x
-TP9SFX
-TP9SF
-TP9SF Elite
-TP9 Elite SC \M/ \M/

User avatar
Janik
Staff Member
Posts: 2742
Joined: Mon Apr 23, 2018 4:59 pm
Founding Member #: 001
Location: Iowa
Contact:

Re: TP9SF Elite Threaded Barrel

Post by Janik » Tue Mar 10, 2020 10:09 pm

CanikFanatik001 wrote:
Tue Mar 10, 2020 10:06 pm
Where can I get a threaded barrel for my sf elite? I am having trouble locating one. Preferably match grade but I’ll take what I can get.
https://www.preppergunshop.com/rcm-cani ... p9sf-elite
1 x

jnichols2
Member
Posts: 55
Joined: Mon Nov 05, 2018 2:13 pm
Location: Near Austin, Texas

Re: TP9SF Elite Threaded Barrel

Post by jnichols2 » Wed Mar 11, 2020 6:48 am

The barrel Janik listed is the one I got. It's not match grade.
However; I'm pretty sure the difference between standard and match grade is above my skills anyway.

As I stated above, it definitely fits, and passes function test. I may be able to fire it today.
1 x

Post Reply