Some threads are not accessible unless you are a registered member. Please take a minute and register to become a member of the largest Canik community online. IT'S FREE!
So I looked up what you are talking about.... It would be much cheaper to buy off the shelf. I would be spending hours just designing the parts and trying to fit them together to make the entire set.... I hate to turn down a challenge, but you would laugh out loud when you saw the cost....
Yeah, me think you right. Oh, I knew it wouldn’t be cheap.
Never hurts to ask.
0 x
We are in a civil war..
..we just haven’t brought out the guns.
Just saw this. I have Traction Grips on everything I own. If you need someone else, I'd love to try it. US flag would be my pick. Weather isn't good right now for good testing though.
Just saw this. I have Traction Grips on everything I own. If you need someone else, I'd love to try it. US flag would be my pick. Weather isn't good right now for good testing though.
Appreciate the offer. I’m good on this, but will have more new products in the pipeline soon and will be asking for testers then.
0 x
Beware of Dragons. For you are crunchy and taste good with ketchup.
@Tejas Products
I received the grip tape last week and was wondering what's the best way to create a pattern?
I was thinking of using blue painters tape and wrapping the grip on the gun a few times to make it thick enough to work with, then cutting it off in 4 sections to try and make it into a single template.
Does that sound reasonable? Or do you have a better technique.
I must have not put the instructions with your package. Sorry about that.
1. Place painters tape over the area you want to cover making sure to overlap
2. Mark out the outline you want to cut
3. Place the tape over the grip material and cut out following your pattern
4. Dry fit finished pattern to your grip
5. If happy with the fit, remove adhesive cover and apply
0 x
Beware of Dragons. For you are crunchy and taste good with ketchup.
I must have not put the instructions with your package. Sorry about that.
1. Place painters tape over the area you want to cover making sure to overlap
2. Mark out the outline you want to cut
3. Place the tape over the grip material and cut out following your pattern
4. Dry fit finished pattern to your grip
5. If happy with the fit, remove adhesive cover and apply
OK...so I guess I wasn't too far off base!
I'll give it a shot by the weekend and report back.
If you need another tester let me know. I have an XD or a Ruger I could use..........
chindogg333, I appreciate your request, but we are now in regular production with these units.... But we do have a special discount code for CF members. GRIP2019
Thanks
Mike
Tejas Products
We also have a new video that hasn't been released yet. But I'll link it here for your appraisal. It's for our Hi-Point Carbine line... We may be working on one for the universal grips later on.
I decided to install the grip on my SF Elite seeing a lot of the "stars" area would have been cut off if I installed in on my SR9c. I did have to remove the original Tejas grip, but really like the look of this one! It feels really good in the hand as well. Should be going to the range tomorrow to do a little training and will bring it along and report back on how it feels shooting with it.
Would there be an option to have the grip in a "Black & Gray" color?
I think that would look really nice.
I decided to install the grip on my SF Elite seeing a lot of the "stars" area would have been cut off if I installed in on my SR9c. I did have to remove the original Tejas grip, but really like the look of this one! It feels really good in the hand as well. Should be going to the range tomorrow to do a little training and will bring it along and report back on how it feels shooting with it.
Would there be an option to have the grip in a "Black & Gray" color?
I think that would look really nice.
Here is the Gray in the various patterns.
IMG_3138.jpeg (248.85 KiB) Viewed 526 times
0 x
Beware of Dragons. For you are crunchy and taste good with ketchup.
Skip to content
CANIK FANATIK FORUM
CANIK FIREARMS DISCUSSION COMMUNITY
Some threads are not accessible unless you are a registered member. Please take a minute and register to become a member of the largest Canik community online. IT'S FREE!
Need 3 testers
Re: Need 3 testers
Post by runeight » Thu Jan 31, 2019 5:54 am
Never hurts to ask.
..we just haven’t brought out the guns.
Re: Need 3 testers
Post by Crosspower » Tue Feb 05, 2019 3:04 pm
Re: Need 3 testers
Post by TL1000RSquid » Tue Feb 05, 2019 3:07 pm
Re: Need 3 testers
Post by Tejas Products » Tue Feb 05, 2019 6:15 pm
Re: Need 3 testers
Post by Tejas Products » Tue Feb 12, 2019 12:12 pm
Thanks
Re: Need 3 testers
Post by GlennSFX » Tue Feb 12, 2019 12:39 pm
I received the grip tape last week and was wondering what's the best way to create a pattern?
I was thinking of using blue painters tape and wrapping the grip on the gun a few times to make it thick enough to work with, then cutting it off in 4 sections to try and make it into a single template.
Does that sound reasonable? Or do you have a better technique.
Re: Need 3 testers
Post by Tejas Products » Tue Feb 12, 2019 12:59 pm
1. Place painters tape over the area you want to cover making sure to overlap
2. Mark out the outline you want to cut
3. Place the tape over the grip material and cut out following your pattern
4. Dry fit finished pattern to your grip
5. If happy with the fit, remove adhesive cover and apply
Re: Need 3 testers
Post by GlennSFX » Tue Feb 12, 2019 1:52 pm
I'll give it a shot by the weekend and report back.
Re: Need 3 testers
Post by chindogg333 » Mon Feb 25, 2019 10:20 pm
Re: Need 3 testers
Post by Tejas Products » Tue Feb 26, 2019 8:14 am
Thanks
Mike
Tejas Products
We also have a new video that hasn't been released yet. But I'll link it here for your appraisal. It's for our Hi-Point Carbine line... We may be working on one for the universal grips later on.
https://www.youtube.com/watch?v=qOng8C1 ... pp=desktop
Re: Need 3 testers
Post by LT USN (Ret.) » Tue Feb 26, 2019 5:11 pm
TajasProducts Hi-point Carbine Laminate Installation Video
Go Navy! Beat Army!
Re: Need 3 testers
Post by Tejas Products » Tue Feb 26, 2019 5:23 pm
Re: Need 3 testers
Post by LT USN (Ret.) » Tue Feb 26, 2019 5:35 pm
Go Navy! Beat Army!
Re: Need 3 testers
Post by Tejas Products » Tue Feb 26, 2019 6:23 pm
I guess the old “be careful what you ask for
Re: Need 3 testers
Post by Janik » Tue Feb 26, 2019 8:33 pm
Re: Need 3 testers
Post by GlennSFX » Thu Mar 07, 2019 5:25 am
I decided to install the grip on my SF Elite seeing a lot of the "stars" area would have been cut off if I installed in on my SR9c. I did have to remove the original Tejas grip, but really like the look of this one! It feels really good in the hand as well. Should be going to the range tomorrow to do a little training and will bring it along and report back on how it feels shooting with it.
Would there be an option to have the grip in a "Black & Gray" color?
I think that would look really nice.
Re: Need 3 testers
Post by skborders » Sun Mar 17, 2019 4:06 pm
Re: Need 3 testers
Post by Tejas Products » Sun Mar 17, 2019 4:54 pm
Return to “Tejas Products”
Powered by phpBB® Forum Software © phpBB Limited
Style: Black-Silver by Joyce&Luna phpBB-Style-DesignPrivacy | Terms