Canik-Gear-Banner2 W74-Guiderods4 Frankthetank
Unanswered topics Active topics
Focused Discussions for all Canik Firearms. (TP Series, P Series, Shark, Stingray & MKEK)
#8476
There's been some questions in the past about the interchangeability of the TP9V2 and TP9DA barrel. My uneducated guess says NO. The V2 barrel will fit and cycle with snap caps in my DA. However, the DA barrel will fit in my V2, but I can not rack the slide and it will not cycle. If anyone has a different experience, let me know. Makes sense though given the square cut on the DA vs the V2.

V2 barrel on the left, DA barrel on the right.
20181113_092151s.jpg
20181113_092151s.jpg (91.67 KiB) Viewed 2282 times
20181113_092153s.jpg
20181113_092153s.jpg (96.58 KiB) Viewed 2282 times
20181113_092206s.jpg
20181113_092206s.jpg (98.82 KiB) Viewed 2282 times
#11352
Janik, I was looking at the shapes of the barrels you put up here and am wondering if your v2 barrel was maybe a later manufacture or different barrel all together? It seems that the v1, v2, and SA barrels are all the same as the DA barrel, assuming that the DA barrel is the one on the left. If you look at the construction of the v2, it has the same narrow top with the serrations as the SA and DA (minus the serrations). The v1, v2, and SA were all pretty much the same construction until the SA mod 2 where the barrel construction on the right in your picture really started to come into focus. All of the SF series pistols have the barrel on the right, pre-SF barrels seem to be the ones on the left.

Check out this barrel I found for the SA and let me know what you think. The one on prepper gun shop for the v2 also has the same narrow top that the DA has.

SA barrel: https://www.apexgunparts.com/handguns/c ... 19-vg.html

v2 PGS barrel: https://www.preppergunshop.com/canik-tp ... fits-tp9v2
#11355
silverstateshooter wrote: Sat Jan 19, 2019 1:24 am Janik, I was looking at the shapes of the barrels you put up here and am wondering if your v2 barrel was maybe a later manufacture or different barrel all together? It seems that the v1, v2, and SA barrels are all the same as the DA barrel, assuming that the DA barrel is the one on the left. If you look at the construction of the v2, it has the same narrow top with the serrations as the SA and DA (minus the serrations). The v1, v2, and SA were all pretty much the same construction until the SA mod 2 where the barrel construction on the right in your picture really started to come into focus. All of the SF series pistols have the barrel on the right, pre-SF barrels seem to be the ones on the left.

Check out this barrel I found for the SA and let me know what you think. The one on prepper gun shop for the v2 also has the same narrow top that the DA has.

SA barrel: https://www.apexgunparts.com/handguns/c ... 19-vg.html

v2 PGS barrel: https://www.preppergunshop.com/canik-tp ... fits-tp9v2
You've got them backwards, the V2 is on the Left. The original Canik55 TP9, V2 and the SA have a more angular slide with the anti-glare ridges. When the DA and SA Mod2 were released, they had a flatter, wider top like the SF and other models. It's also noted on the Century Arms website in the threaded barrel and replacement barrel listings they "will not fit the SA".

Here is a picture of the V2 and DA side by side, you can see the construction of the barrel and the slide.

V2 on left, DA on right
20190114_141903.jpg
20190114_141903.jpg (181.57 KiB) Viewed 2258 times
#11398
Janik wrote: Sat Jan 19, 2019 11:55 am
silverstateshooter wrote: Sat Jan 19, 2019 11:12 am For sure! Totally makes sense now! Sorry about my confusion!
No problem. Glad it makes sense. I need to get on the ball now and order one of the threaded barrels for the V2 before they disappear from Preppers website.
Just snagged one myself! They are on sale right now, $20 off!
#16412
HeliarcLee wrote: Tue Apr 30, 2019 10:39 am I didn’t know if this was ever finalized, or i missed it. Does the V2 barrel that preppers sells fit and function properly in the TP9DA? I would really like to find a threaded barrel for my newly ordered DA.
The barrel will function when cycles with dummy rounds. But I never have tried it at the range. I still think there could be an issue give the different design of the lugs on each barrel. But as of yet, nothing definitive.
#16501
Janik wrote: Tue Apr 30, 2019 5:24 pm
HeliarcLee wrote: Tue Apr 30, 2019 10:39 am I didn’t know if this was ever finalized, or i missed it. Does the V2 barrel that preppers sells fit and function properly in the TP9DA? I would really like to find a threaded barrel for my newly ordered DA.
The barrel will function when cycles with dummy rounds. But I never have tried it at the range. I still think there could be an issue give the different design of the lugs on each barrel. But as of yet, nothing definitive.
So on my endless googling of the Canik brand I came across this.



In the comments, he says they are using the Canik threaded barrel for what looks like an SF or SA mod.2

https://www.centuryarms.com/canik-9mm-t ... arrel.html
New to Canik, and this site!

Hello, and welcome to Canik Fanatik site.

New to me Elite SC

When I contacted Canik a couple of months ago inqu[…]

I'm buying 100 rds of 9mm every week, as well as o[…]

What happens if "they" decide[…]