[Janik]

Looks like some new offerings from Canik. A rep from Century sent me these photos from SHOT Show. Still waiting on full details.

937088 small.jpg (64.66 KiB) Viewed 2876 times

728960 small.jpg (52.88 KiB) Viewed 2876 times

[runeight]

First thing I noticed was the optic plate. Thinner. No witness sights.

[GlennSFX]

First thing I noticed was the optic plate. Thinner. No witness sights.

Me too!!!
Almost looks like it's a milled slide for the optic. ...I wonder what the slide cut looks like. That plate doesn't look like it's deep enough to accept the mounting screws for the optic. maybe everything is now recessed.

Slide release lever appears to be cut into the frame??? Maybe to help with the strong hand thumb up tight to the frame preventing the slide to lock back.

TP9 LC... ???????
I like the lightening cuts!
Black CAMO is nice too!!

[Janik]

Yah, looks like it's based on the SF model, and the plates are a lot slimmer. I'm curious too how they are secured. But I hope they don't move away from mounting plates and only cut them for Trijicon. It does look though that there's a thin plate. As for no rear iron, I'm sure these were in the works for awhile, so I'm not giving up hope yet that future offerings will have the rear iorn.

[GlennSFX]

Yah, looks like it's based on the SF model, and the plates are a lot slimmer. I'm curious too how they are secured. But I hope they don't move away from mounting plates and only cut them for Trijicon. It does look though that there's a thin plate. As for no rear iron, I'm sure these were in the works for awhile, so I'm not giving up hope yet that future offerings will have the rear iorn.

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

[Janik]

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

There doing it somehow though. There are two Canik models now available overseas that have an RDO cut and rear irons. One of the models is a compact. Aside from the Canik METE that's been discussed, here's a pic of the newest with the RDO and rear irons. I believe it holds 12+1.

50515067_588771051570778_6036604370211045376_n.jpg (34.6 KiB) Viewed 2860 times

[GlennSFX]

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

There doing it somehow though. There are two Canik models now available overseas that have an RDO cut and rear irons. One of the models is a compact. Aside from the Canik METE that's been discussed, here's a pic of the newest with the RDO and rear irons. I believe it holds 12+1.

50515067_588771051570778_6036604370211045376_n.jpg

Let's hope it won't be RDO specific or limited. I can't imagine they would!

[TL1000RSquid]

0 interest in the SFL Combat, I will take the 12rd model or whatever it is, if they're going to make it model specific mount I can live with that as long as its Trijicon.

[TL1000RSquid]

Yah, looks like it's based on the SF model, and the plates are a lot slimmer. I'm curious too how they are secured. But I hope they don't move away from mounting plates and only cut them for Trijicon. It does look though that there's a thin plate. As for no rear iron, I'm sure these were in the works for awhile, so I'm not giving up hope yet that future offerings will have the rear iorn.

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

They should just delete the loaded chamber indicator I dont think anyone actually uses/relies on them.

[Janik]

They should just delete the loaded chamber indicator I dont think anyone actually uses/relies on them.

Agreed. I never pay attention to them, and always forget they are even there.

[keltex78]

I like that! If Canik could release that in the US, I would have my new EDC...

[runeight]

First thing I noticed was the optic plate. Thinner. No witness sights.
[/quote
Black CAMO is nice too!!

Only if they do the whole gun. Glock did a few and it was gorgeous especially the AIr Fore blue Camo.

Just doing the slide is the lazy way out to me.

[runeight]

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

There doing it somehow though. There are two Canik models now available overseas that have an RDO cut and rear irons. One of the models is a compact. Aside from the Canik METE that's been discussed, here's a pic of the newest with the RDO and rear irons. I believe it holds 12+1.

50515067_588771051570778_6036604370211045376_n.jpg

Looks heavy to me. Notice slide thickness at rear.

[runeight]

Yah, looks like it's based on the SF model, and the plates are a lot slimmer. I'm curious too how they are secured. But I hope they don't move away from mounting plates and only cut them for Trijicon. It does look though that there's a thin plate. As for no rear iron, I'm sure these were in the works for awhile, so I'm not giving up hope yet that future offerings will have the rear iorn.

I still think it will take a slide redesign to incorporate a dovetail for a rear iron...just not enough real estate behind the chamber indicator!

This is correct.

[runeight]

I know, I know..offer a six inch model with optic cut!

[Badgerboy]

I think the "LC" stands for Lighter Checkbook. I haven't even shot my SAR 9 yet...and there are several others in the family that have been neglected.

[runeight]

If your gonna apply Camo apply Camo!

[runeight]

Picture the black Camo with Camo grip tape the same color Tejas.

[runeight]

Janick, post the picture of your Camo slide again.

[Janik]

Janick, post the picture of your Camo slide again.

Here it is. I'm looking for some camo grip tape.

20181227_133305.jpg (86.83 KiB) Viewed 2810 times