Page 1 of 1

Reloads used in my 2nd range trip

Posted: Thu Nov 08, 2018 7:34 am
by Amegatek
Janik requested info about the reloads I was using on my second trip to the range post in range/review section. For those who didn't see this post, I was shooting a Canik TP9SA Mod 2. Here is a pic of the reloading:

Image

Nothing overly special about the load data. Mixed brass, 115 gr TC poly coated lead bullets (Eggleston Munitions), over 5.4 grains of Hodgdon Longshot powder. Primer is CCI 500. Cartridge OAL is 1.10". Stay tuned, I will be working up a load using 124 gr Acme coated bullets soon. Here are the range results of this load.

Image

Image

Re: Reloads used in my 2nd range trip

Posted: Thu Nov 08, 2018 2:21 pm
by bubba68
My SFx doesn't know what a factory round is. I have run my reloads through it since day one. Typically shoot 115 gr plated Berry's with 4.8 grains of HP 38 in mine. They have worked 100% so far. I still have the stock recoil spring and I am probably nearing 700 rounds through it.