Page 2 of 2

Re: TP9SFX

Posted: Tue Oct 09, 2018 5:51 am
by ncjw
That is what I was thinking, it may be just a small cosmetic flaw in the mold for the plastic.

Re: TP9SFX

Posted: Tue Oct 09, 2018 6:35 am
by John_
Well I just inspected mine using a large magnifying glass and mine appears to have casting lines or marks there. Like the material around the metal slide guide is different, or cast/pressed different. Those small, faint "casting lines" are on both sides on my frame at the forward slide guide.
I'm not concerned about mine.

Re: TP9SFX

Posted: Tue Oct 09, 2018 1:37 pm
by GarrettDA
Howdy y'all!

Thanks for reaching our Bronx, we are currently working together to make sure this is not an issue for him. Sometimes during the process of which the firearms are made, this slight cosmetic issue happens. I have only seen this been reported to me one other time (it may have happened before, but not been reported to me). Sometimes this spot can be removed by rubbing over it by hand, sometimes it might just be unsightly. However it is always good if this happens to check with us, just to be safe if you feel it does not belong.

Garrett